To order this product you must be logged into your distributor account. Not yet a M+A distributor, but interested in becoming one? Fill out this form.
Hog Heaven Electrically Conductive Mat
- Electrically Conductive - Nitrile rubber surface is electrically conductive to quickly drain static electricity to help protect sensitive equipment from damage
- Comfortable - High-density nitrile-blended cushion helps eliminate pressure to the lower back and legs, providing superior comfort
- Safe - Certified high-traction by the National Floor Safety Institute (NFSI); sloped edges provide a safe transition from floor to mat
- Durable - Nitrile-blended cushion provides years of useful service life; cushion is molded, not glued, to the nitrile rubber surface so it will not separate; edges will not crack or curl
- Versatile - Welding safe; ESD rating of electrically conductive; chemical resistant; surface is grease/oil proof and cushion is grease/oil resistant
- Available in 5/8" or 7/8" thicknesses with solid black or with OSHA-approved caution yellow borders on two sides
- Includes ground wire and snap
Recommended for indoor use in static-sensitive environments where an electrically conductive mat is necessary to protect sensitive equipment or products.
2' x 3' (23" x 32")
3' x 5' (32" x 58")
4' x 6' (46" x 69")
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
SURFACE
Material: Nitrile rubber
CUSHION
Material: High-density, closed-cell nitrile/PVC-blended foam
Overall Mat Thickness: 5/8 inch (0.6250" ) or 7/8 inch (0.8750") depending on the product selected
STANDARDS & TESTING
- Passes flammability standard DOC-FF1-70
- Certified high-traction by the National Floor Safety Institute (NFSI)
- ESD rating of electrically conductive
- Compression Deflection:
5/8" Mat: 47.8% at 20 psi; 61.6.0% at 40 psi
7/8" Mat: 51.0% at 20 psi; 66.0% at 40 psi - ASTM C1028-96 static coefficient of friction
Dry 0.87
Wet 0.85
Hog Heaven Electrically Conductive mats can be cleaned using the instructions below:
- Scrub with a deck brush (as needed) using a detergent with a neutral pH
- Rinse with a hose or pressure washer
- Hang to dry
Mats should always be dry before they are placed back in service.
